一种基于虚拟页地址映射的NAND Flash管理算法

本文提出了一种基于虚拟页地址映射的NAND Flash管理算法.该算法通过定义坏块表、对应表等结构，以及设计的坏块替换策略和虚拟页地址到实际物理页地址的转换算法，实现上层软件采用虚拟地址对NAND Flash的无坏块连续页地址访问.该算法是一种高效的地址映射算法，能高效地对数据进行索引，占用SRAM空间较少，使系统达到高性能，并使得闪存使用的更加稳定持久.     

晶体管h参数微变等效电路的研究

晶体管h参数微变等效电路是电子技术中求解低频、小信号放大电路常用的分析方法.本文通过具体分析,将模拟放大电路进行了新的分类,并且明确而系统地给出运用微变等效电路求解各类模拟放大电路动态指标Av、ri和γ0公式、解题难点及规律.     

燃烧火焰温度分布重建结果误差分析

分析了采用辐射型CT算法的燃烧火焰温度发布重建结果误差产生的原因，给出了解决方法。     

A Novel Onboard-gateway-based Mechanism to Improve TCP Performance in Aeronautical Satellite Networks

The IP-based networks on aircraft serve to support Internet services via satellites. However, in aeronautical satellite hybrid net- works,the TCP protocol performance often deteriorates due to improper decreases and slow recovery of the congestion window. This paper proposes a window size determination and notification mechanism, onboard-gateway-based mechanism (OGBM), which is based on the onboard gateway in the networks on aircraft. A cross-layer approach is adopted by the onboard gateway to obtain the satellite link bandwidth information. And then, by the gateway, through changing the receiver’s advertised window field in ACK packets, TCP sources are notified of the window size of each TCP source calculated on the ground of bandwidth delay product and flow numbers. The mechanism is able to avoid improper changes of TCP window and serve multiple users. Simulation results show that the mechanism with the fairness index close to 1 improves TCP performance in aeronautical satellite networks.     

数据采集系统的总体评价

从性能指标出发，综述了数据采集系统总结评价技术的发展状况。并提出了对数据采集系统性能指标的两类分类方法 。     

测点的布置对紊流度测量的影响

本文采用不同数目和布置的测点对十余种不同类型和大小的稳态压力畸变和以压力紊流度表征的动态畸变流场进行了测量,得到了其流场的紊流度分布。文中对所测得的平均紊流度、紊流度的平方平均值及定义的不均匀分布度D值进行了分析,得出了测点的数目和布置对紊流度测量的影响,从而为工程上紊流度的测量提供参考。     

飞机强度试飞活动部件残余变形分析

试飞中，飞机残余变形测量结果分析主要是判别所测残余变形是否为危及飞行安全、有碍操纵等的有害变形。而飞机活动部件残余变形实测结果常常超差的一个重要原因，是实际测量中，部件所处的状态与图纸要求的差异（存在偏度）。对此提出了偏度修正法和空间基准面修正法，并利用某型飞机全动平尾残余变形的实测数据，验证了这两种方法的有效性，并就方法的适用性进行了讨论。     

一种适于硬件实现的简化的无列表SPIHT

文中提出简化的无列表SPIHT,它采用状态标识符来记录集合分割信息,而不采用动态的链表操作。它将 精练过程提至不重要像素处理过程之前,从而省略状态标识MNP和MCP,减少状态操作的时间,易于硬件实现和实时 图像处理。     

失真仪误差分析和检定问题

本文通过大量的实验数据,详细分析了失真仪的各种误差,指出了影响失真仪质量的原因,提出了合理判定仪器质量的方法和建议,为厂家提供了改进设计的思路。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.